Wow – the holidays are here and we are down to Christmas already. It’s amazing how this time of year just seems to fly by unless you’re 5-10 years old and are just dying for Christmas Day to get here now!
When we last left here I was working on my racing trailer, the Monza was back for some updates, the Camaro got some work done and I think it was late October – see what I mean, It’s already mid-December without a new post on the site. But there has also been some big changes underneath and one that I have found to be very interesting. About a month ago, my hosting service (HostGator) announced that they were increasing the monthly price – again. Now I have been with them about 7-8 years and of course when I started it was a really good bargain, something like $4.00 a month. The latest increase has them at $12.00 per month and if I remember correctly, this is a $4.00 increase in just the last 24 months. Like everyone else, I try to cap the monthly expenses as best I can and for something like this which I consider to be “fun”, each increase hurts a little bit. So, I was off to find a new hosting service and I actually experimented with four different ones until I found one that fit my criteria – and then there is a certain amount of pain in moving your website to a new hosting service – no matter what they tell you in the cool, splashy ads that they have on their sites – so you really want to make sure of the new service before performing the work. Obviously price was a huge consideration but I needed a CPanel interface, a good amount of bandwidth and a reasonable amount of server space to place my website. I also looked at other things such as their TOS policy, cancellation policy and their ability to stay upright over the long haul. I ended up at Web Host Pro with a monthly bill of just over $4.00. And I have to say I only needed to contact their tech support one time to clear up a question I had during my move. Without going into crazy details, the move took me about a week of work, which included moving all of the site files, databases, email account plus testing everything before making it “live” again. Unless you happened to catch my site during the actual move, I doubt if you would have known. Now, the one interesting piece that I have noticed is the amount of spam mail to my email account has been cut to almost nothing. I mean I am talking a drop in spam from several hundred messages everyday to about 3-5. I would love it if it would stay that way but I am sure as time goes by, things will change. It also tells me that email spammers don’t actually target individual email accounts as much as they target hosting email servers. Overall, I hope I don’t have to move again anytime soon but we will see what happens. I have one more change coming for the site but I am going to hold off on that one until after the holidays.
Some quick updates – The Trailer
The trailer project continues with a couple of the aluminum storage area bins mounted again. I changed things around and mounted my oil/fluid/spray can rack on the right side wall when you are facing the workbench. The shop rag container went back where it was between the rack just mentioned and the side door. On the other wall, I mounted my helmet and racing suit rack. By doing this it allows me to make full use of the countertop work area that had to be shorted. Underneath the helmet rack and to the side of the tool boxes, I had about 20″ of floor space so I built a storage unit out of a piece of 2×6’s and 1/2 plywood. I came up with a three-sided box, 6 inches high that with the open side facing the rear of the trailer, it allows my car jack to be pushed in. A small strip of wood near the front of the box lets the front wheel go over it and prevents it from rolling back out. On top of this where the 1/2″ plywood is mounted, I used some 1″ inch wood to frame out a location for the two jackstands. A short piece of chain and a quick connect keeps the jackstands in place. To the left of this, I mounted a piece of 2″ PVC pipe about 25″ long using a PVC cap along with a bolt, washer and nut arrangement. This is for holding the jack handle. I painted the box with some of the same grey paint that I had used on the floor of the trailer and mounted it securely to the floor with a number of wood screws. I now have all of my lifting equipment in one convenient spot. The last thing that I was able to do was get the doors on the one wood floor cabinet that I kept working correctly. I ended up having to replace 3 of the 4 hinges and then put a slide bar clasp on the front to keep the doors closed. I am now in the process of taking some of my bits & pieces that have been in boxes for months on end and putting them away.
The Monza is back for some serious updates and the longer it sits here, the longer the list grows. At this point we have built and welded in place new front engine mounts, removed the old side mounts, re-worked and corrected the rear engine/transmission mounts. Next was getting the issues with the steering corrected. When we did the steering last year, there were compromises that we had to accept and those left us with a steering that worked but was not as solid as we liked it to be. Basically, I started over cutting out some of the previous work and coming up with a solution that is much better and cleaner. To get the angle we wanted inside the car and get it connected to the rack and pinion, it requires two u-joints. But to make this better, I incorporated a support joint that is welded to the frame – this removes any side to side play that existed due to the double u-joints. I was also able to provide additional clearance for the new headers that will be built for the new engine. We also have determined that a new rear was on the list and have removed the old 12 bolt in favor of a Ford 9 inch unit. Along with that, disc brakes will be added to the rear. Replacement fiberglass doors are being mounted along with new lexan windows on the sides and rear. A new hood with a different scoop is going on and of course a new paint job. We have also finished re-working the brake lines on the front of the car and are in the process of installing a new shifter cable. The old one was getting really tight and binding up some.
The Camaro in contrast was rather easy – pull out the previous engine and put a new one in. But we also plan on putting the new Wilwood front brake kit in during the off-season. And maybe getting around to color-sanding the paint job which hasn’t been done yet. Anyway, passes on the new engine put us in the solid 5.90 range although we were hoping to be in the 5.75-5.80 area. So far our adjustments to timing and fuel have not netted us any additional ET reduction but it’s always about the combination and we just need to find it for this new motor. We are also discussing moving to a slightly larger tire to try and reduce the RPM level going through the traps. At least this coming season we will be able to spend most of our time with the car refining the combination. That’s a good thing.
The Mustang project is somewhat on hold as parts are being gathered for it. This is a true low-dollar effort but we expect some great runs from it. Craigslist, eBay and the local trader paper are definitely our friends here for good, used pieces. We will put in new stuff where it’s needed but a lot of times a good used part is perfectly fine. Heck, everything is used as soon as you take it out of the box.
Maybe this year? I sure hope so as mostly all I have done for it lately is to keep the battery charged. It’s made it’s way into the garage a couple of times but it never gets to stay long – there’s always something else that has to be taken care of right away.